Sous-traitants automobile
L'exigence essentielle de l'industrie automobile concerne le traitement ultérieur des pièces produites. Une enduction (peinture, revêtement par poudre, chromage,…) des pièces produites doit être garantie dans la plupart des cas.
Münch Chemie International s'est spécialement concentrée sur ce problème. Dès leur phase de développement, les produits sont conçus de telle manière à ce que le traitement de la surface soit possible sans autres préparations. Une peste à la silicone est exclue par le choix ciblé des matières premières. Le prix de l'innovation décerné au salon de la technique de coulée sous pression de Kielce, Pologne, en 2005 pour la gamme de produits la plus innovante et spécialement optimisée pour l'enduction des surfaces n'est qu'une référence parmi beaucoup d'autres.
Agent de démoulage -
(54)
Release Agents for the purpose of processing PU foams and PU elastomers
- low dosage
- high effectiveness
- all-puporse for the PU sector
Retour page détailes
Solvent-free release agent, optimized for cast urethane applications with polyester-based resins. High surface quality of the produced parts.
Retour page détailes
Solvent-free release agent with high viscosity, optimized for polyester resins. High surface quality of the produced parts. FDA-approved.
Retour page détailes
Water-based, silicone-free release agent for PU- rigid & semi-rigid foams. Meets the requirements of the automotive industry, suited for absorbers, etc.
Retour page détailes
Bladder Coating, especially developed for the production of driving belts
- water based
- semi-permanent
- improved surface quality of the
finished product
Retour page détailes
Bladder Release Agent for the production of Air Spring Systems
- water-based
- semi-permanent
- improved surface quality of the
finished product
Retour page détailes
Water-based release agent, excellent substitude for solvents. Free of silicone and waxes to help obtaining bright, homogenous surfaces.
Retour page détailes
Water-based release agent concentrate for aluminum die casting applications, optimized for heavier castings.
Retour page détailes
Wax-free release agent concentrate for aluminum-die casting applications, suited for heavy castings that require high structural stability.
Retour page détailes
Water-based release agent concentrate for magnesium-die casting to meet the requirements of the automotive industry.
Retour page détailes
Water-based, wax-free release agent concentrate for aluminum-die casting applications.
Retour page détailes
Solvent-based, semi-permanent release agent. It is easy to use and allows a high number of possible demouldings.
Retour page détailes
Solvent-based, semi-permanent release agent, that significantly enhances the desired slip properties. It is easy to use and allows a high number of possible releases per application.
Retour page détailes
Our Release Agent Mikon® F-58 is a further development of the well-proven Mikon® F-57 – with an even higher performance.
Retour page détailes
Release Agent, quickly ventilating. Especially for processing polymer concrete, mineral casting as well as abrasive fillers.
Retour page détailes
High-end water-based release agent, releases certainly Prepeg, epoxy, vinyl and polyester resins, even PU-gel coats are released.
Retour page détailes
Water-based release agent, quickly ventilating, especially for epoxy resins.
Excellent to use at high temperatures with long performance.
Retour page détailes
Solvent-based release agent for elastomer- and epoxy resin- applications even at high temperatures. Not suited for silicone-rubber.
Retour page détailes
Sprayable and solvent-based multi-purpose release agent for the rubber processing industry
Retour page détailes
Solvent-based, semi-permanent release agent spray, suitable for the purpose of processing all common elastomer types except silicone-rubber.
Retour page détailes
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Free of solvents and silicone.
Retour page détailes
Water-based "ready-to-use" - release agent, forming a coherent release film on the mould. Release Agent MK-222 offers a solvent-free formulation and thermal stability up to approx. 300°C.
Retour page détailes
Semi-permanent release agent for tire manufacturing, equipped with special slip additives to reduce demoulding forces.
Retour page détailes
Water-based, semi-permanent release agent concentrate for the purpose of processing all common rubber types except silicone-rubber.
Retour page détailes
Water-based, semi-permanent release agent for the purpose of processing silicone-rubber, peroxide-cured compounds or the hot-forming of elastomers.
Retour page détailes
Water-based, semi-permanent release agent for the purpose of processing silicone-rubber, peroxide-cured compounds or the hot-forming of elastomers.
Retour page détailes
Water-based, semi-permanent release agent for the manufacturing of tires. Temperature-stable up to 300°C and free of solvents and silicone
Retour page détailes
Water-based, semi-permanent release agent for the purpose of processing all common elastomers (except silicone-rubber) and tire types.
Retour page détailes
Water-based, semi-permanent release agent, optimized for the purpose of processing EPDM-, HNBR-& FKM- compounds. Free of solvent and ready-to-use out of the box.
Retour page détailes
Water-based, semi-permanent release agent spray, optimized for the purpose of processing EPDM-, HNBR-& FKM- compounds. Free of solvent and ready-to-use out of the box.
Retour page détailes
Water-based, semi-permanent release agent, slip-enhancing and optimized for the purpose of processing all common elastomer types except silicone-rubber. Free of solvent and ready-to-use out of the box.
Retour page détailes
Water-based release agent for the purpose of processing all common elastomer types except silicone-rubber. Free of solvent and ready-to-use out of the box.
Retour page détailes
Water based "ready-to-use" - release agent. The product contains a slip agent, resulting in remarkably smooth surfaces, significantly reducing the friction between the elastomere and the release agent.
Retour page détailes
Water-based "ready-to-use" - release agent, forming a coherent release film on the mould. The product contains a slip agent, resulting in remarkably smooth surfaces, significantly reducing the friction between the elastomer and the release agent.
Retour page détailes
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Very low demoulding forces required, due to lubricating additives.
Retour page détailes
Water-based release agent concentrate, forming a coherent release film on the mould and suited for the purpose of processing all rubber types, especially EVA-compounds.
Retour page détailes
Water-based, semi-permanent mould release agent concentrate for the purpose of processing EVA-compounds.
Retour page détailes
Semi-permanent, solvent-based mould release agent, to enhance slip. Compatible to all common elastomer types and metal moulds.
Retour page détailes
Water-based, silicone-free release agent for the automotive industry. High surface quality of the casted parts and well suited for filled and unfilled RIM-systems.
Retour page détailes
Solvent-based, silicone-free release agent for the purpose of processing PU-rigid, PU-integral foams and cast urethanes in polyether- and polyesther-systems. High surface-quality of the casted parts.
Retour page détailes
Suitable for the purpose of processing PU foams:
- reduced solid content
- polyoil-free
- all-purpose for the PU sector
- surface quality meets automobile
requirements
Retour page détailes
Water-based release agent for PU-rigid and PU-integral foams in polyether- and polyester-systems. Allows the release of not yet fully cured parts.
Retour page détailes
Water-based, solvent-free release agent for the purpose of processing phenolic resin bonded cotton fibre sheets (nonwovens). Works well in steam-supported applications.
Retour page détailes
Water-based, semi-permanent release agent for the purpose of processing phenolic resin bonded cotton fibre sheets (nonwovens). Works well in steam-supported applications.
Retour page détailes
release agent for phenolic resin bonded cotton fibre sheets. Works well in steam-supported applications and creates a fairly hard release film
Retour page détailes
Release Agent for the purpose of processing PU foams:
- reduced solid content
- polyoil-free
- all-purpose for the PU sector
- surface quality meets automobile
requirements
Retour page détailes
Solvent-based release agent for the purpose of processing PU-rigid foams and cast uerthane in polyesther- and polyether-systems.
Retour page détailes
Solvent-based multi-purpose release agent containing a careful selection of waxes. It is suitable for the purpose of processing polyurethane and polyester resins
Retour page détailes
Semi-permanent high-tech mould sealer, based on a careful selection of the latest high-performance solvents. Sealer Mikon® 699 MC is suited for the processing of any kind of thermoset material.
Retour page détailes
Water-based, "easy-to-use" - mould sealer for the purpose of processing polyester, epoxy and phelolic resins on plastic or metal moulds.
Retour page détailes
Easy-to-use, solvent-based mould sealer to help improving flowability of the elastomer.
Retour page détailes
Internal additive for the purpose of processing PU-elastomers, PU-rigid and PU-integral foams in RIM-, RRIM-& SRIM-systems.
Retour page détailes
Additive, acts as an internal release agent for the purpose of processing PU-rigid foams. Post-processing capabilities of the castings are not impaired.
Retour page détailes
High-performance Lubricant, stable even at high temperatures, suited for all wear points, e.g. ejector pins.
Retour page détailes
water-based, "ready-to-use" process aid that helps, mounting tires on the rim. Free of solvents and silicones.
Retour page détailes
water-based, "ready-to-use" process aid that helps, mounting tires on the rim. Fast evaporating product, yet free of solvents and silicones.
Retour page détailes
water-based process aid concentrate that helps, mounting tires on the rim. Free of solvents and silicones.
Retour page détailes
Water-based, soap-free lubricant as mounting aid for tires on automated tire uniformity testing equipment.
Retour page détailes
Water-based, soap-free concentrated lubricant as mounting aid for tires on automated tire uniformity testing equipment.
Retour page détailes
Water-based heavy-duty-cleaning agent to remove persistant deposits from almost any kind of metal surface
Retour page détailes
Solvent-free heavy-duty-cleaning agent to remove persistant deposits from almost any kind of metal surface even at room temperature.
Retour page détailes
Solvent-based 'heavy duty' - cleaning agent, intended for the treatment of metal dies and similar objects at room temperature.
Retour page détailes
Recyclable high-performance Cleaner, suited to rinse pipes and casting heads of low-pressure PU-machines.
Retour page détailes
Heavy-duty, solvent-based cleaning agent to remove deposits of epoxy, polyester and phenolic resins, waxes, release agents and PUR from metal surfaces.
Retour page détailes
PE-based cleaning compound for extruders and injection machines for the purpose of processing thermoplastics
Retour page détailes
Internal release agents -
(3)
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester resin.
Retour page détailes
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester and epoxy resin.
Retour page détailes
Additive, acts as an internal release agent, specifically suited for the purpose of processing epoxy resin.
Retour page détailes
Outside Tire Paint to improve rubber flow properties and avoid knit-lines and other visual defects during vulcanization.
Retour page détailes
Outside Tire Paint for the tire producing industry to improve rubber flow properties and avoid knit-lines and other visual defects during vulcanization.
Retour page détailes
Classic, black outside tire paint for any type of tire. The Lubricant features a water-based formultaion and increases the flowability of the compound.
Retour page détailes
High-performance Lubricant, stable even at high temperatures, suited for all wear points, e.g. ejector pins.
Retour page détailes